› ›

compatible light meter?

scovarscovar
in RF60 Questions
Is there a light meter that works with the Cactus system, like the Sekonic L-478DR works with pocket wizard?

Comments

  • AntonioAntonio
    Hello @scovar, there aren't any built-in ones like the Sekonic but any light meter with a sync port will work with the V6.

    What you need to do is simply connect the V6 to your light meter by a sync cable, press the button on the meter unit, a signal is setnt to the V6 via cable, then trigger other V6 units set to Receiver mode. 

    Thanks and hope this helps!
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".

    TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
  • CarloanmanCarloanman
    Will the sekonic l308 work with cactus like the l 358 and fire with the pc cable attached
  • CarloanmanCarloanman
    Does the ca200 have the same sync pc plug as the l308s u
  • AntonioAntonio
    edited October 2017
    Yes, like all sync cables the CA-200 uses a standard PC-sync jack.


    Thank you!
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".

    TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
Sign In or Register to comment.