› ›

Installing Cactus Firmware Updater & Updating Cactus devices on Windows 10 PC

AntonioAntonio
edited August 2015 in V6 Announcements and FAQ
Before installing the Updater and or connecting your Cactus device, you will need to disable the Signed Driver Enforcement (also known as digital signature) on your Windows 10. 

Follow the steps below:
  1. Press Windows key on your keyboard .
  2. Go to Setting >> Updater & Security >> Recovery >> Advanced Startup (computer will restart here)
  3. After restarting Windows, click Troubleshoot.
  4. Click Advanced Options.
  5. Click Windows Startup Settings.
  6. Click Restart.
  7. After restarting your computer a second time, choose Disable Driver Signature Enforcement from the list by typing the number 7 on your keyboard (your computer will restart automatically).
  8. After restarting, you will be able to install the Cactus Firmware Updater normally. During installation Windows will display a warning message, click Install this driver software anyway.
Tips: The next time you restart your computer, the Driver Signature Enforcement will be in effect again. You will have to repeat this process for updating any new Cactus devices. If you wish to update devices with the same computer, we recommend installing the drivers for each one before you shut down or restart your computer.
Antonio Lao
Brand Manager
_____________

To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".

TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.

Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
Sign In or Register to comment.