What happens if you press the shutter / Test button on LV5, does the LED first light up orange at half-press, then green at full-press? Then as you do that it should send a signal to the Yongnuo unit (TX).
If the camera does not release shutter as you full-press the button on the LV5 but only do so when you press the test button directly on the Yongnuo (TX), then likely it is not compatible.
It goes without saying please also make sure the sync / shutter cords are connected securely to the LV5 / RF-603II / camera.
Thank you.
Antonio Lao Brand Manager
_____________
To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".
TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.
Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com. At Cactus, we listen.
Comments
If the camera does not release shutter as you full-press the button on the LV5 but only do so when you press the test button directly on the Yongnuo (TX), then likely it is not compatible.
It goes without saying please also make sure the sync / shutter cords are connected securely to the LV5 / RF-603II / camera.
Thank you.
Brand Manager