› ›

Fuji XT-10 and Nikon SB900 won't fire

akennedy28akennedy28
in V5 Questions
First time using new V5 duo - attempted to follow all instructions that came with units but unable to get fuji to fire the flash either on the V5 on camera, or the Rx V5 off-camera.  Many thanks for some advice as to what I'm obviously doing wrong.

Comments

  • AntonioAntonio
    Hi @akennedy28,

    Have you already set the SB900 to M (manual) mode.

    As for the V5, make sure both transceivers are set to the same channel.  You can half-press the Test button on the TX unit and see if both unit lights up.  Keep them at a distance and not right next to one another.

    Thanks!
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".

    TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
Sign In or Register to comment.