Don't have the SWAP CONTROL menu


I want to control my flash zoom.

I don't have the SWAP CONTROL menu.

All the other sub-menu items are there.

Thanks for your help!


  • Which firmware version are you using? 

    Antonio Lao
    Brand Manager

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".

    TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.

    Feel free to suggest an improvement or share product ideas. Contact us directly at  At Cactus, we listen. 
  • Thanks Antonio!

    I've updated to 1.1.019 using the updater in this page:

    Still, no SWAT CONTROL menu.

    Thanks for your help!
  • Are you using the V6 in "TX" mode?

    If you switch it on in "RX" mode (as a receiver), you won't see the SWAP CONTROL item in the SUB-MENU.

    If you switch the V6 to "TX" mode, you should see the SWAP CONTROL item between DIAL DIRECTION and WORKING RANGE.
  • Thanks a lot Class A!

    Well, finally, I found what I was looking for (control the zoom of my SB-910 flash).

Sign In or Register to comment.