› ›

EV Adjustments not working Cactus v6 with Canon 430EXIII-RT

ArnoPrijsArnoPrijs
in V6 Problems
Dear all,

Recently I did by two cactus V6's. After installing and trying to use them I wanted to adjust the EV level remotely but the only adjustment I see is on the V6 RX and not on the flashgun. So no adjustments are made on the flash and I have to adjust the 430EXIII manually.

Both v6's have the profile of the canon profile for the 430II*

Hope their is a solution to this problem so I can use the V6's properly.

Thanks for replying.

Regards Arno

Comments

  • AntonioAntonio
    Hello Arno,

    If my memories are correct the 430exiii runs purely on digital TTL protocols so you need to select a flash profile that is also digital, such as the 320ex flash profile or the Godox V860 profile. Then set your flash to E-TTL mode and it will work.

    Thanks!
    Antonio Lao
    Brand Manager
    _____________

    To help us better help you, always state the exact firmware version installed on your Cactus device(s), such as: "1.1.013", "NIK.A.001", "v.103", or "A06".

    TTL or HSS not working on Cactus V6 II and V6 IIs? Be sure to check hot shoe connectivity by doing the <CAMERA INFO> check.

    Feel free to suggest an improvement or share product ideas. Contact us directly at info@cactus-image.com.  At Cactus, we listen. 
Sign In or Register to comment.